書誌事項
- タイトル別名
-
- Effects of Ion Processing of Cutting Edge of Tools on Tool Wear and Punching Characteristics in Micropunching Process
- マイクロセンダンカコウ ニ オケル コウグ ハサキ エ ノ イオン カコウ ガ コウグ マモウ トクセイ ト センダントクセイ ニ アタエル エイキョウ
この論文をさがす
抄録
<p>The effectiveness of the punching process to form the nano metric cutting edge of microtools was investigated in this study. To achieve improvement of tool wear and stability of shared surfaces. An argon ion irradiation beam for finishing the cutting edge of a micropunch of nanometric size was developed. Firstly, the cutting edge radius of the micropunch was decgreased from the micrometric to nanometric scale. Secondly, chipping of the WC-Co alloy at the cutting edge of the micropunch was decreased using on ion beam irradiation micropunch. Moreover, the shear droop length in the punched hole was decreased by using ion beam irradiation micropunch. Therefore, ion beam irradiation can effectively improve the cutting edge quality of a micropunch with no apparent damage.</p>
収録刊行物
-
- 塑性と加工
-
塑性と加工 60 (698), 58-63, 2019
一般社団法人 日本塑性加工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390845713069559552
-
- NII論文ID
- 130007618573
-
- NII書誌ID
- AN00135062
-
- ISSN
- 18820166
- 00381586
-
- NDL書誌ID
- 029599926
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可