書誌事項
- タイトル別名
-
- Finite Element Analysis of Iron Powder Compaction for Prediction of Clack Occurrence using Drucker-Prager Cap Model
- Drucker-Prager Cap モデル オ モチイタ テツフンマツ ノ アップン セイケイ カイセキ ト ハカイ ハッセイ ノ ハンベツ
この論文をさがす
説明
<p>Powder metallurgy, PM method is one suitable method to produce metal parts with high accuracy and high cost performance. Powder compaction process using closed-die system is applied to mass production of various PM parts. However, failure of green compact during compaction such as slip clack often occurs especially on multi step parts. Finite Element Method (FEM) analysis is effective to predict such crack occurrence. In this study, we have tried to simulate iron powder compaction process by using general purpose FEM software ANSYS by applying Drucker-Prager Cap (DPC) Model as yield criterion for metal powder. Three kind of experiment, Uniaxial failure test, Single shear test and Lateral force measurement test was suggested to estimate initial and subsequent yield surfaces of the powder. As result, the materials input parameters for DPC model have been successfully identified as the FEM analysis fairly predicts density distribution of hollow shape with inner flange on several loading pass of the tools. Moreover, it is determined that the crack at the inner flange corner occurs in case of inappropriate loading pass as an intersection of stress state pass with shear failure yield line.</p>
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 66 (8), 405-412, 2019-08-15
一般社団法人 粉体粉末冶金協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390845713086727424
-
- NII論文ID
- 130007689951
-
- NII書誌ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 029945395
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可