Effect of Polyethylene Glycol on Electrodeposition of Zn Active Metal Oxide Composites from a Particle-Free Solution

DOI Web Site 21 References Open Access
  • Ueda Daiki
    Department of Materials Process Engineering, Graduate School of Engineering, Kyushu University
  • Oue Satoshi
    Department of Materials Science & Engineering, Faculty of Engineering, Kyushu University
  • Takasu Tomio
    Department of Materials Science, Faculty of Engineering, Kyushu Institute of Technology
  • Nakano Hiroaki
    Department of Materials Science & Engineering, Faculty of Engineering, Kyushu University

Bibliographic Information

Other Title
  • 非懸濁溶液からのZn-活性金属酸化物複合電析に及ぼすポリエチレングリコール添加の影響
  • ヒケンダク ヨウエキ カラ ノ Zn-カッセイ キンゾク サンカブツ フクゴウデンセキ ニ オヨボス ポリエチレングリコール テンカ ノ エイキョウ

Search this article

Abstract

<p>Electrodeposition of Zn–Zr oxide and Zn–V oxide composites was performed under galvanostatic conditions from an unagitated sulfate solution containing Zn2+, Zr4+, or VO2+ ions and an additive such as polyethylene glycol (PEG). The sulfate solution had a pH of 2 and the electrodeposition was performed at 313 K. The effects of PEG on the co-deposition of the Zr oxides and V oxides and their polarization behavior were investigated. Additionally, the effects of PEG on the microstructure of the deposits were investigated. Although the Zr content in the deposits obtained from the Zn–Zr solution without PEG was approximately zero, it increased significantly at a current density above 1000 A m−2 following the addition of PEG. In the Zn–V solution, the V content in the deposits obtained from 100 A m−2 to 2000 A m−2 was higher with PEG than that without PEG. In the presence of PEG, the cathode potential polarized, the rate of hydrogen evolution increased, and the hydrolysis reaction of Zr4+ and VO2+ ions occurred easily. This resulted in the Zr content and V content increasing in the deposits. Additionally, the crystal platelets of Zn in the Zn–Zr oxide film and the Zn–V oxide film became fine, and the surface coverage of the spongiform Zr oxide and the film-like V oxide increased. Furthermore, the corrosion current densities of the Zn–Zr oxide film and the Zn–V oxide film obtained from the solution with PEG were lower than those from the solution without PEG. The reduction reaction of dissolved oxygen decreased in the films with PEG, thereby decreasing the corrosion current density.</p>

Journal

References(21)*help

See more

Related Projects

See more

Details

Report a problem

Back to top