A Design of Ocean Current Velocity Measuring Device

DOI
  • Zhao Jichao
    Tianjin University of Science and Technology
  • Dai Fengzhi
    Tianjin University of Science and Technology Tianjin Tianke Intelligent and Manufacture Technology CO., LTD. Advanced Structural Integrity International Joint Research Centre, Tianjin University of Science and Technology
  • Ma Xin
    National Oceanic Administration Beihai Marine Environmental Monitoring Center Station
  • Wang Fengkun
    Tianjin University of Science and Technology
  • Wen Haokang
    Tianjin University of Science and Technology
  • Hao Hongbo
    Tianjin University of Science and Technology
  • Zhang Qianqian
    Tianjin University of Science and Technology

説明

Ocean current refers to the relatively stable flow of the surface water of the ocean in a certain direction in a certain direction, and is the main regulator of the thermal environment on the surface of the earth. At present, the ocean current velocity detection at sea is basically a field measurement by a staff member in a boat, and the adjustment of the detector position during the measurement process is very inconvenient. This paper designs a new submarine current velocity measuring device, including measuring ship, cable, fixed anchor and ocean current velocity detector. The cable on the reel is retracted through the cable retracting room, and the end of the cable is fixedly provided with a fixed anchor. The fixed anchor is fixedly provided with a plurality of ocean current flow rate detectors, and the ocean current flow rate detector has a built-in control chip, a wireless communication module, and Pressure Sensor. This device can flexibly adjust the depth of the detector according to actual needs, so as to measure the flow velocity of different depths.

収録刊行物

キーワード

詳細情報 詳細情報について

  • CRID
    1390846609806618240
  • DOI
    10.5954/icarob.2020.os9-1
  • ISSN
    21887829
  • 本文言語コード
    en
  • データソース種別
    • JaLC
    • Crossref
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ