Study on Physical and Chemical Properties of High Magnesium Nickel Slag-Phosphogysum Composite Cementitious Materials in Different Particle Sizes

DOI Web Site 参考文献32件
  • Hua Sudong
    Nanjing Tech University, Nanjing, Jiangsu 211800, China.
  • Zhang Lili
    Suzhou Concrete Cement Products Research Institute Co., Ltd, 215001, China.
  • Zhang Jian
    Nanjing Pukou Urban and Rural Construction Group Co., Ltd,211800, China.
  • Jiang Mingjing
    Nanjing Pukou Urban and Rural Construction Group Co., Ltd,211800, China.
  • Guo Dapeng
    Nanjing Pukou Urban and Rural Construction Group Co., Ltd,211800, China.
  • Tong Fei
    Nanjing Pukou Urban and Rural Construction Group Co., Ltd,211800, China.
  • Zhao Yihe
    Suqian Huayi Concrete Co., Ltd, Suqian, Jiangsu 223839, China.

この論文をさがす

説明

<p>High-magnesium nickel slag (HMNS) and phosphogypsum (PG) are hazardous industrial solid waste. The present work focuses on the feasibility of using the two materials as supplementary cementitious materials (SCM) added to cement. The slag and gypsum were ground into different specific surface area (2235 cm2/g, 3040 cm2/g and 3900 cm2/g), then mixed into ten different samples. The effect of SCM addition was detected by isothermal conduction calorimetry (ICC) testing, compressive strength, mercury intrusion porosimetry (MIP), X-ray diffraction (XRD), scanning electron microscope (SEM) and linear shrinkage. The results showed that the HMNS-PG composite cementitious material with suitable specific surface area has relatively high activity, and a small amount of gel and alumina-ferric oxide-trisulfate (AFt or ettringite) are detected in HMNS-PG composite cementitious material. According to the results, the high-magnesium nickel slag could be together with phosphogypsum as substitutes for cement, improved the utilization rate of industrial waste and reduced environmental pollution.</p>

収録刊行物

参考文献 (32)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ