Low Environmental Impact Cleaning Technology with Ozone Micro-Bubbles Generated by a Venturi Tube

DOI Web Site Web Site 1 Citations 4 References
  • YU Ruoyi
    筑波大学大学院システム情報工学研究科構造エネルギー工学専攻
  • KANEKO Akiko
    筑波大学大学院システム情報工学研究科構造エネルギー工学専攻
  • ABE Yutaka
    筑波大学大学院システム情報工学研究科構造エネルギー工学専攻
  • IKE Masatoshi
    合同会社アプテックス

Bibliographic Information

Other Title
  • ベンチュリ管式オゾンマイクロバブルによる低環境負荷洗浄技術
  • ベンチュリカンシキ オゾンマイクロバブル ニ ヨル テイカンキョウ フカ センジョウ ギジュツ

Search this article

Abstract

<p>Cleaning technology is widely used to remove oil or resist from metal and semiconductor and soon. However, it causes high cost and severe environmental impacts because of the sewage disposal. Owing to strong oxidizing ability and self-decomposing power, ozone micro-bubbles generated by a Venturi tube was proposed. The purpose of this study is to research the capability of ozone micro-bubbles and improve the cleaning mechanism. In this study, we focus on the microbubble generator with a Venturi tube. We visualized the Venturi Tube by a high-speed camera to measure the bubble diameter. We also measure the shear stress near the test piece surface by using PIV. And by titration with Potassium iodide, ozonated water and ozone gas concentration are measured. Ozone gas is well dissolved after passing through the Venturi tube. Also, brass test pieces applied with cutting oil and latex resin are washed by using bubbly flow with ozone micro-bubbles. It has been confirmed that ozone micro-bubbles are able to clean the test pieces efficiently.</p>

Journal

Citations (1)*help

See more

References(4)*help

See more

Related Projects

See more

Keywords

Details 詳細情報について

Report a problem

Back to top