書誌事項
- タイトル別名
-
- Formation Process of Microstructure in Laser Powder Bed Fusion with WC Cemented Carbide Powder
- チョウコウゴウキンフンマツ オ モチイタ レーザ セキソウ ゾウケイ ノ ビシ ソシキ ケイセイ カテイ
- Formation process of microstructure in laser powder bed fusion with WC composite powder
この論文をさがす
抄録
<p>In this paper, the microstructure formation process of WC cemented carbide manufactured by Laser Powder Bed Fusion (LPBF) was investigated with WC/25 wt%Co agglomerated and sintered powder. The internal structure of the as-built cemented carbide specimen was categorized into two regions. The first region included many pores and a unique microstructure which was not observed from the samples fabricated with conventional manufacturing methods. In this region, W2C and W3Co3C were formed due to a WC decomposition and an evaporation of graphite and Co during laser irradiation. On the other hand, the second region showed the similar microstructure to the conventional method. The microstructure of the first region revealed that the powder was completely melted during a laser scanning process. The precipitation process of W2C, W3Co3C, and Graphite phase was considered with calculated liquidus projection of a C-Co-W ternary phase diagram.</p>
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 67 (6), 313-319, 2020-06-15
一般社団法人 粉体粉末冶金協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390848250117242496
-
- NII論文ID
- 130007854905
-
- NII書誌ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 030490134
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可