-
- 政木 清孝
- 沖縄工業高等専門学校 機械システム工学科
書誌事項
- タイトル別名
-
- Correlation between Rotating Bending Fatigue Limit and Mechanical Properties of Extruded Magnesium Alloy
- マグネシウム ゴウキン オシダシザイ ノ カイテン マゲ ヒロウ ゲンド ト キカイテキ セイシツ ノ ソウカン
この論文をさがす
抄録
<p>In order to investigate the correlation between fatigue limit and static strength of extruded Mg-Al-Zn alloys, rotating bending fatigue tests with three types of Mg-Al-Zn alloy, AZ31, AZ61 and AZ80, were carried out. And static tensile test and compression test with these alloys were also performed. On the other hand, in order to clarify the correlation between them, more than 200 past literature researches on fatigue property of various Mg alloys were surveyed. As a result of past literature research, it was found that there was a proportional relationship between fatigue limit and static strength. The fatigue limit and the static strength obtained by the experiment of this study agree well with the proportional relation obtained as a result of the literature survey. In particular, considering the super long life fatigue range up to 108 cycles or more, the fatigue limit of AZ31 and AZ61 was found to be almost equal to their compressive 0.2% proof stress. However, it was found that the fatigue limit of AZ80 is lower than the compressive 0.2% proof stress. The best method to predict the fatigue limit of all materials was through the use of tensile strength.</p>
収録刊行物
-
- 材料
-
材料 69 (9), 672-678, 2020-09-15
公益社団法人 日本材料学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390848647550828416
-
- NII論文ID
- 130007906040
-
- NII書誌ID
- AN00096175
-
- ISSN
- 18807488
- 05145163
-
- NDL書誌ID
- 030662793
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可