変動磁場を利用した新しい磁気研磨法に関する研究
書誌事項
- タイトル別名
-
- Study on a new method of magnetic abrasive finishing process using alternating magnetic field
抄録
<p>In order to solve the problems such as the easy deformation and poor recovery of magnetic brush in conventional magnetic abrasive finishing method, a new magnetic abrasive finishing method has been proposed in this study. By using alternating current, the coil can produce alternating field in magnetic circuit. Since alternating magnetic field, the magnetic particles can form magnetic brush periodically that can keep it having a good shape during finishing process. From theoretical formulas, the relationship of the frequency between alternating current and alternating magnetic force is investigated. The results are the same with the measure results. At last, a multi-stage finishing experiment is performed with the alternating magnetic field abrasive finishing process. There are two steps in this finishing, rough finishing and ultra-precision finishing. The results show that surface roughness can be improved from 230 nm Ra to 19 nm Ra in 60 minutes.</p>
収録刊行物
-
- 精密工学会学術講演会講演論文集
-
精密工学会学術講演会講演論文集 2020A (0), 172-173, 2020-08-20
公益社団法人 精密工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390850092192599168
-
- NII論文ID
- 130007988814
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可