書誌事項
- タイトル別名
-
- Relationship between anisotropy and outer diameter change of micro metal tubes in hollow sinking
抄録
<p>The outer diameter of the drawn tubes of various materials was evaluated to clarify the effect of the plastic anisotropy on the outer diameter reduction in hollow sinking. Stainless steel, copper, and aluminum tubes were used as the starting materials. They were drawn for one pass by using a draw-bench machine without an inner tool. Tensile tests were conducted on the starting materials to obtain the Lankford value, which shows the plastic anisotropy. The outer diameter became smaller than the die diameter as the Lankford value increased for each drawing speed ratio. The outer diameter became smaller than the die diameter as the drawing speed ratio increased, although the Lankford value decreased. Therefore, the drawing speed ratio is more dominant for outer diameter reduction from the die than Lankford value.</p>
収録刊行物
-
- 日本機械学会関東支部総会講演会講演論文集
-
日本機械学会関東支部総会講演会講演論文集 2020 (0), 16A09-, 2020-03-13
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390850247498613504
-
- NII論文ID
- 130007994405
-
- ISSN
- 24242691
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可