Development of Portable Sandblasting System and Test Method for Evaluating the Abrasion Resistance of Mortar by the System
-
- KANAMORI Takuya
- Institute for Rural Engineering, NARO
-
- KAWABE Shohei
- Institute for Rural Engineering, NARO
-
- ASANO Isamu
- Institute for Rural Engineering, NARO
-
- TAKAHASHI Ryoji
- Institute for Rural Engineering, NARO
-
- MORI Mitsuhiro
- Institute for Rural Engineering, NARO
Bibliographic Information
- Other Title
-
- 可搬式サンドブラスト装置およびそれを用いたモルタル系材料の耐摩耗性評価試験法の開発
Abstract
<p>To establish a method of testing the abrasion resistance of cementitious repair materials in situ, we developed a portable sandblasting system and performed an accelerated abrasion test for mortar using this system to examine the appropriate test conditions in terms of the injection pressure and distance from the blast gun to the specimen (hereafter referred to as pressure and distance, respectively). Silica sand, with an average particle diameter of 0.5 mm, was the abrasive. The test results indicate that ‘0.20 MPa and 50 mm’ and ‘0.15 MPa and 25 mm’ were suitable combinations of pressure and distance, respectively, for evaluating the abrasion resistance within 2 mm from the surface. In addition, the two combinations yielded acceleration ratios of 630 and 510, respectively, in the water jet with sand for 10 h. It was confirmed that a depth gauge can measure the abrasion depth with the same accuracy as that of a laser.</p>
Journal
-
- Transactions of The Japanese Society of Irrigation, Drainage and Rural Engineering
-
Transactions of The Japanese Society of Irrigation, Drainage and Rural Engineering 89 (2), I_271-I_278, 2021
The Japanese Society of Irrigation, Drainage and Rural Engineering
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390851817140978816
-
- NII Article ID
- 130008069335
-
- ISSN
- 18847242
- 18822789
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- CiNii Articles
-
- Abstract License Flag
- Disallowed