Validation of Filtering Method for Evaluating Ship Performance in Calm Sea Using Onboard Monitoring Data
-
- Naoto Sogihara
- National Maritime Research Institute, National Institute of Maritime, Port, and Aviation Technology
-
- Akiko Sakurada
- National Maritime Research Institute, National Institute of Maritime, Port, and Aviation Technology
-
- Masaru Tsujimoto
- National Maritime Research Institute, National Institute of Maritime, Port, and Aviation Technology
この論文をさがす
抄録
<p>Evaluation of ship performance in actual seas is important for reduction of greenhouse gas emissions from the shipping sector. Recently, activities to investigate ship performance by means of onboard monitoring have become increasingly widespread. While onboard monitoring can collect a vast amount of data, it is necessary to follow a proper procedure for an accurate evaluation of ship performance.</p><p>Prior to this study, the authors proposed a filtering method called the Resistance Criteria Method (RCM) with the aim of extracting onboard monitoring data collected in a calm sea, in which the rate of added resistance is a key parameter. This study addresses validation of RCM using onboard monitoring data of a panamax container ship and a medium range tanker. The validation was carried out by comparing the ship speed and fuel consumption in the onboard monitoring data and a voyage simulation using the evaluated performance based on the conventional method and RCM as an input. The results showed that application of RCM is effective for evaluating ship performance based on onboard monitoring data. </p>
収録刊行物
-
- 日本船舶海洋工学会論文集
-
日本船舶海洋工学会論文集 33 (0), 25-33, 2021
公益社団法人 日本船舶海洋工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390852174975922304
-
- NII論文ID
- 130008080999
-
- NII書誌ID
- AA12057769
-
- ISSN
- 18811760
- 18803717
-
- NDL書誌ID
- 031652068
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可