Cracking Process in Delayed Fracture of High-Strength Steel after Long Atmospheric Exposure

DOI Web Site 4 Citations 52 References Open Access

Description

<p>This paper is the first microscopic observation of the entire cracking process in delayed fracture of high-strength steel bolt after long-term atmospheric exposure. A sufficiently fresh fracture surface exhibits the initiation of the propagating crack in a thin zone beneath the screw groove, resulting from the merging of multiple cracks nucleated therein. The fracture morphology is initially intergranular, exhibiting the three-dimensional shape of prior austenite grains, but the stress and strain states at the nucleation sites are not uniquely specified. The fracture morphology alters as the crack extends from intergranular to quasi-cleavage and fine dimples, associated with increasing stress intensity under a constant-displacement condition. The change from inter- to trans-granular fracture is continuous, implying affinity among different morphologies associated with the increased density and the distribution of potential crack nucleation sites in the crack front. The crack propagation in the quasi-cleavage and fine dimple regions is step-wise of about 50 µm per step. Recent studies about the function of hydrogen in embrittlement are referred to in respect of the accumulation of strain-induced damage. The enhanced generation of strain-induced vacancies is the presumable function of hydrogen compatible with the present findings.</p>

Journal

  • ISIJ International

    ISIJ International 62 (4), 776-787, 2022-04-15

    The Iron and Steel Institute of Japan

Citations (4)*help

See more

References(52)*help

See more

Related Projects

See more

Keywords

Details 詳細情報について

Report a problem

Back to top