Sulfur Detection in Coke by Laser-Induced Breakdown Spectroscopy
-
- Chen Peng
- State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University
-
- Luo Han
- State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University
-
- Cui Minchao
- Graduate School of Advanced Technology and Science, Tokushima University Key Laboratory of High Performance Manufacturing for Aero Engine (MIIT), Northwestern Polytechnical University
-
- Wang Zhenzhen
- State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University Graduate School of Advanced Technology and Science, Tokushima University
-
- Deguchi Yoshihiro
- State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University Graduate School of Advanced Technology and Science, Tokushima University
-
- Yan Junjie
- State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University Graduate School of Advanced Technology and Science, Tokushima University
説明
<p>Accurate determination of sulfur (S) content in coke is of great significance to improve the quality of iron and steel. In this study, the sulfur in coke standard samples was detected in argon (Ar) atmosphere using laser-induced breakdown spectroscopy (LIBS), and S I 182.034 nm was chosen as the analytical line. The experimental results showed that it was advantageous to detect S in the early stage of plasma generation. Compared with tablet samples, the spectral intensities of binder samples on the copper foil tape were greater and the signal-to-noise ratio (SNR) was also greater. As for reduplicate experiments, the coefficient of variation (CV) of spectral intensities of binder samples was 10.58% and that of tablet samples was 88.54%. The plasma signal induced by binder samples was stronger and more stable. The internal standard method and support vector machine regression (SVR) were used to quantitatively analyze the sulfur content in binder samples, and SVR showed more accurate prediction accuracy. R2 of SVR with electron density and self-absorption correction was 0.965, root mean square error of prediction (RMSEP) was 0.18 wt.% and the limit of detection (LOD) was 0.026%. This result proved the applicability of binder for sulfur measurement in coke using LIBS.</p>
収録刊行物
-
- ISIJ International
-
ISIJ International 62 (5), 875-882, 2022-05-15
一般社団法人 日本鉄鋼協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390855112754651648
-
- ISSN
- 13475460
- 09151559
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- Crossref
- OpenAIRE
-
- 抄録ライセンスフラグ
- 使用不可