有限要素解析でのRC部材のせん断損傷過程評価のための変位指標の検討

DOI

書誌事項

タイトル別名
  • Investigation on displacement index for evaluation of shear damage process of RC members in Finite Element Analysis

抄録

<p>This study investigated the applicability of displacement index to evaluate shear failure process of RC beams. First, the relationship between shear failure process such as shear crack initiation, stirrup yielding and shear capacity and local displacement such as the change of cross section height and axial displacement at compression failure zone were investigated from the experimental results. It was clarified that the displacement indexes are applicable to evaluate not only shear capacity but also shear failure process. Then, the applicability of the displacement indexes in Finite Element Analysis was also investigated and it was confirmed that the displacement index was useful to evaluate shear failure process. Finally, the possibility to apply the change of cross section width as new displacement index was presented based on 3 dimensional behavior.</p>

収録刊行物

詳細情報 詳細情報について

  • CRID
    1390858674105692672
  • DOI
    10.11532/structcivil.69a.848
  • ISSN
    1881820X
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ