Design and Fabrication of a Mutual Control Electronic Circuit for Solar and Electrical Water Heating

DOI
  • Al-Talib Ammar A.
    Department of Mechanical and Mechatronics, Faculty of Engineering, Technology and Built Environment, UCSI University
  • Saruchi Sarah Atifah
    Faculty of Manufacturing and Mechatronic Engineering Technology, Universiti Malaysia Pahang
  • Hassan Cik Suhana
    Department of Mechanical and Mechatronics, Faculty of Engineering, Technology and Built Environment, UCSI University
  • Izni Nor Aziyatul
    Centre of Foundation Studies, Universiti Teknologi MARA, Cawangan Selangor, Kampus Dengkil

説明

This research is a temperature controller that will be implemented to ensure that the water temperature of the solar water heating unit is maintained at the desirable level at all times of use. This control circuit is designed to control the On/Off action of the immersed electrical heater according to specific temperature range. A temperature sensor will sense the water temperature constantly and send signal to a micro-controller unit. The micro-controller will process the data according to a written program and control the actions of electrical heater. At the same time, temperature reading will be displayed through LCD and real-time data can be viewed from a computer via serial port. During times of sufficient sunlight, solar energy will be the main source used for heating water; otherwise, there will be an automatic switching to the electrical operated immersion heater. This controller will give reliability to users of solar water heating systems.

収録刊行物

キーワード

詳細情報 詳細情報について

  • CRID
    1390859758187719296
  • DOI
    10.5954/icarob.2023.os27-3
  • ISSN
    21887829
  • 本文言語コード
    en
  • データソース種別
    • JaLC
    • Crossref
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ