局所的なひずみの不均一分布とマクロな応力-ひずみ曲線を同時に再現する試み

書誌事項

タイトル別名
  • Bridging between Heterogeneous Local Strain Distribution and Macroscopic Stress-strain Curves

抄録

<p>A modified continuum composite model was utilized to analyze the stress–strain behavior of as-quenched steels with a fully martensitic microstructure. The model was employed to express the stress–strain curves obtained by a simple tensile test and those obtained by forward and backward loading using a simple shear test machine. The study confirmed that the model can represent the stress–strain behavior under both forward and backward deformation. In addition, the evolution of local strain distributions during plastic deformation was investigated using a digital image correlation method. The strain distributions and their evolution during deformation were qualitatively represented using this model. The discrepancies between the model calculations and experiments are due to the limitations of the iso-work assumption and the impact of slip deformation on the macroscopic work-hardening behavior of martensitic steels. Highly strain-concentrated regions aligned along the longitudinal direction of the lath and block, known as in-lath-plane slips, may not play an important role in the work-hardening behavior of as-quenched martensitic steels. However, the other slips, namely the out-of-lath slip, may play a significant role in the work hardening of as-quenched martensitic steels.</p>

収録刊行物

  • 鉄と鋼

    鉄と鋼 110 (3), 90-100, 2024-02-15

    一般社団法人 日本鉄鋼協会

参考文献 (21)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ