オパールフォトニック結晶膜の色調変化─ひずみ関係の定量評価および複雑形状試験片への適用

  • 周 宇涛
    東北大学金属材料研究所 東北大学大学院量子エネルギー工学専攻
  • 楊 志鵬
    東北大学金属材料研究所 東北大学大学院量子エネルギー工学専攻
  • 小山 元道
    東北大学金属材料研究所
  • 味戸 沙耶
    東北大学金属材料研究所
  • 北條 智彦
    東北大学金属材料研究所
  • 不動寺 浩
    国立研究開発法人物質・材料研究機構
  • 秋山 英二
    東北大学金属材料研究所 国立研究開発法人物質・材料研究機構

書誌事項

タイトル別名
  • Quantitative Evaluation of the Relationship between Strain and Color Change in Opal Photonic Crystal Films and Application into Complex Specimen Geometries
  • オパールフォトニック結晶膜の色調変化 : ひずみ関係の定量評価および複雑形状試験片への適用
  • オパールフォトニック ケッショウマク ノ シキチョウ ヘンカ : ヒズミ カンケイ ノ テイリョウ ヒョウカ オヨビ フクザツ ケイジョウ シケンヘン エ ノ テキヨウ

この論文をさがす

抄録

<p>The color change of opal photonic crystal films (OPCFs) due to deformation was quantitatively evaluated using digital image correlation (DIC) analysis. OPCFs were pasted on specimens of three different gauge geometries, and random patterns were formed on the opposite side of each specimen for DIC analysis. To assess the applicability of using OPCFs-based strain characterization for analyzing steel structural components and associated metallurgical analyses, smooth, width-gradient, and holed specimens were prepared in this study. As deformation increased in the smooth specimen, the color of the OPCFs changed significantly. The color change in the OPCFs could be quantitatively converted into strain values through Hue value analysis. Heterogeneous strain distributions could also be quantitatively analyzed using OPCFs-based analysis at the submillimeter or millimeter scale. When the strain gradient is too high, for example, near a stress concentration site such as a hole, local peeling of the OPCFs away from the specimen surface can occur. Consequently, for quantitative characterization, we must take proper care when measuring this upper limit of the “strain gradient” as well as strain, which would depend on the adhesion and surface condition of the specimen.</p>

収録刊行物

  • 鉄と鋼

    鉄と鋼 110 (3), 311-320, 2024-02-15

    一般社団法人 日本鉄鋼協会

参考文献 (31)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ