摩擦係数の接地圧および滑り速度依存性を考慮したタイヤ力学モデルの実験検証

書誌事項

タイトル別名
  • Experimental validation of a tire mechanical model with contact pressure- and slip velocity-dependent friction coefficient

抄録

<p>In this study, a new tire mechanical model is proposed for the calculation of longitudinal stress distribution, taking into account the dependence of the friction coefficient on contact pressure and sliding speed. In the proposed model, the contact shape and contact pressure distribution are calculated based on the elliptical contact patch tire model. In the calculation of longitudinal stress in the adhesion range, not only longitudinal deformation in length direction caused by slip ratio but also nonlinear longitudinal deformation in width direction caused by tread radius was taken into account. The coefficient of friction in the sliding region was deduced from the viscoelasticity of rubber based on Persson's multiscale friction theory. Since the proposed model analytically links the longitudinal force of tire to the viscoelasticity of tread rubber, it can be applied to the design of rubber compounds to achieve the desired braking and driving characteristics. The validity of the proposed model was experimentally verified using an inside drum tester with the road surface segments equipped with a quartz piezoelectric sensor. The results show that with appropriate parameter settings, the model-calculated longitudinal stress distribution is in good agreement with the experimental results.</p>

収録刊行物

  • 年次大会

    年次大会 2023 (0), J113-08-, 2023

    一般社団法人 日本機械学会

詳細情報 詳細情報について

問題の指摘

ページトップへ