非接着補剛と薄肉スリット入りFRP積層材による既存部材の曲げ剛性向上法

  • 伊沢 温
    豊橋技術科学大学大学院 建築・都市システム学専攻
  • 山本 梨乃
    豊橋技術科学大学大学院 建築・都市システム学専攻
  • 樋口 彰悟
    豊橋技術科学大学大学院 建築・都市システム学専攻
  • 松本 幸大
    豊橋技術科学大学 次世代半導体・センサ科学研究所

書誌事項

タイトル別名
  • BENDING STIFFNESS IMPROVEMENT FOR THE EXISTING MEMBERS USING LAMINATED THIN FRP SLIT PIPE BY UNBONDED RESTRAINING MECHANISM

抄録

<p>FRP materials that have superior material properties, e.g., high weight strength ratio and corrosion resistance, have been widely applied to industrial, aerospace, and construction use in recent. In the construction field, the repair and strengthening method using FRPs has been strongly researched and developed. Almost all methods adopt the adhesive bonding method to apply FRPs to the existing structures. This paper shows a new strengthening method and mechanism using thin FRP restrainers. We propose the use of slitted thin FRP pipes for strengthening. The FRP pipes are wrapped with rotational lamination around the existing pipe member to increase the bending stiffness and buckling load. Because of the high elastic deformation performance of FRP, the plastic band-like application method can be used for the wrapping. As a result, the proposed strengthening method is demonstrated successfully, and it is clearly shown that the bending stiffness and buckling load are increased by the present method.</p>

収録刊行物

参考文献 (4)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ