Strain Rate Dependence of Slip Persistence in TiZrNbHfTa Investigated with Microcantilever Bending Tests

DOI Web Site Web Site 37 References

Search this article

Description

<p>The strain-rate dependence of slip persistence in TiZrNbHfTa was investigated using microcantilever bending tests instead of conventional single-crystal tensile tests. These tests were performed using micrometre-sized cantilevers fabricated within a grain of the polycrystalline material, and the ψ–χ relationship was obtained in detail. Bending tests were conducted in two strain rates to determine the ψ–χ relationship. The results showed that the slip plane macroscopically persisted on the {112} plane in the high-strain-rate test, while in the low-strain-rate test, the apparent slip plane roughly coincided with the plane where the maximum shear stress was applied. Detailed tracing of the slip bands, using atomic force microscopy, on the specimen surface showed that the slip plane was microscopically persisted on the {112} plane in high-strain-rate tests, while in low-strain-rate tests, the slip plane often cross-slipped between the {112} and {110} planes.</p>

Journal

  • MATERIALS TRANSACTIONS

    MATERIALS TRANSACTIONS 65 (9), 1055-1060, 2024-09-01

    The Japan Institute of Metals and Materials

References(37)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top