High Performance Resists Tailored for 248 nm Chemical Amplification of Resists Lines Technology : Resist and Processes :

NDLデジタルコレクション

この論文をさがす

説明

Different dry developable resist systems operating in positive bilayer (Si-CARL) and negative top surface imaging (Top-CARL) modes were investigated for application in 248 nm lithography. After exposure with the KrF excimer laser projection aligner (NA=0.37), development, aqueous silylation and oxygen reactive ion etching, 0.25μm structures were obtained as the ultimate resolution of Si-CARL with a topresist containing diazoketone photoactive compounds. The process latitudes for 0.4μm and 0.5μm lines and spaces amount to 25% and 30% for exposure and to 3μm and 3.2μm for defocus, respectively. Comparable values were determined for an alternative Si-CARL system with a new acid catalysed topresist. The required doses for zero bias exposure are 65-70 mJ/cm^2 (diazoketone) and 21 mJ/cm^2 (acid catalysed). The Top-CARL resist also utilizes the acid catalysed deprotection chemistry for selective silylation of the exposed areas. The preliminary formulation presented well-shaped 0.35μm structures at 10 mJ/cm^2.

収録刊行物

  • JJAP series

    JJAP series 5 145-152, 1992-04-30

    Japanese Journal of Applied Physics

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ