Last-Engaged Thread-Height Reduction of Pin Increases Fatigue Life of Drill Collar

DOI

説明

<jats:title>ABSTRACT</jats:title> <jats:p>Most drill collar fatigue failure occurs in the last-engaged thread (LET) of the pin. This type of failure is because of the concentration of thread loading in this area. As a method to decrease the load concentration, the LET thread height reduction is presented in this paper. Firstly, the effectiveness of the LET height reduction was verified using finite element analysis. Secondly, the analytical results were supported using full-size fatigue tests. Finally, the practicability of the redesigned connection was confirmed through torsional test, make-and- break test and full-size tensile test.</jats:p>

収録刊行物

詳細情報 詳細情報について

  • CRID
    1870302167924205440
  • DOI
    10.2118/18704-ms
  • データソース種別
    • OpenAIRE

問題の指摘

ページトップへ