Compression of chirp pulses from a femtosecond fiber based amplifier

この論文をさがす

説明

We demonstrate a single mode fiber based master oscillator power amplifier (MOPA) with a single polarization and a fully monolithic design. We have built a passive mode-locked polarization maintaining Yb doped fiber as the master oscillator contains a semiconductor saturable absorber mirror and a chirped fiber Bragg grating for the dispersion management. The net intracavity dispersion was managed to be slightly anomalous. The oscillator generates the 150 fs (sech 2 ) pulses at the center wavelength of 1065 nm, and the repetition rate of 42 MHz. The oscillator output was amplified to 1.4 W from 80 mW in the single stage fiber amplifier which results in pulse shape distortion. The pulse shaping with a band pass filter and a compressor was applied to the amplified pulses. The shaping pulses have the pulse width of 90 fs and the pulse energy of 16 nJ.

収録刊行物

詳細情報 詳細情報について

  • CRID
    1871991017620945408
  • DOI
    10.1117/12.2078595
  • ISSN
    0277786X
  • データソース種別
    • OpenAIRE

問題の指摘

ページトップへ