A preliminary study of a cloth guiding mechanism for automatic sewing system

DOI 機関リポジトリ 機関リポジトリ (HANDLE) オープンアクセス

この論文をさがす

説明

Purpose - In the trend from mass production to mass customization, more flexible production systems are required. In the clothing field, many studies about automatization of sewing processes have been done into producing small amounts of various kinds of products. The purpose of this paper is to propose a versatile guiding mechanism of a cloth for an automatic sewing system. Design/methodology/approach - Real sewing processes were referenced for the mechanism, and curved stitch is formed holding a point on a cloth. This mechanism consists of a solenoid for holding a cloth and a roller to prevent deformation of the cloth. When a cloth is sewn with the mechanism, the trajectory of the stitch is unstable because of anisotropy of a cloth. A precise trajectory was obtained by adding a device to control the pressure of the roller for holding a cloth and keeping a tension properly applied to a cloth. Findings - It was found out that shearing property is the most related to the stability of sewing trajectory: lithe tension for guidance applied to a cloth is constant, deformation of the cloth was observed and it was the cause of unstableness of sewing trajectory. By controlling the tension for guidance applied to a cloth properly according to the direction of the cloth, precise sewing trajectory was obtained. Originality/value - There have been some studies in which sewing conditions were dynamically controlled according to the mechanical properties of a cloth. To these studies, here it was proposed that sewing conditions were kept constant by controlling the guidance of a cloth according to its mechanical properties.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ