Experimental and numerical studies of virtual cathode oscillator
説明
A new configuration of virtual cathode oscillator (vircator) has been studied for high-power microwave generation. In this vircator configuration, a resonant cavity is used to enhance the beam-field interaction in order to improve the microwave efficiency. Experiments were carried out on repetitive pulsed power generator "ETIGO-IV" (400 kV, 13 kA, 120 ns, 1 Hz). The output microwaves are diagnosed for peak power and dominant mode by using horn receivers and field probes. The microwave frequency is obtained by fast-Fourier transformation of the signal recorded by a high-speed digital oscilloscope. The initial experimental results obtained by E-field probes have indicated a beam-to-microwave conversion efficiency of /spl sim/10 %. Three-dimensional particle-in-cell simulations were carried out by using simulation code "MAGIC". Simulation results are compared with experimental results to examine the effect of the cavity and possible ways of further improvement of microwave efficiency.
収録刊行物
-
- Digest of Technical Papers. PPC-2003. 14th IEEE International Pulsed Power Conference (IEEE Cat. No.03CH37472)
-
Digest of Technical Papers. PPC-2003. 14th IEEE International Pulsed Power Conference (IEEE Cat. No.03CH37472) 1 451-454, 2004-07-08
IEEE
