<title>Interlaboratory Comparison Of Mtf Measurements In Japan</title>

この論文をさがす

説明

The working group of Japan Optical Engineering Research Association (JOERA) was organized in 1974 and made interlaboratory'domparisons of MTF measurements and OTF Standardization. MTF measurements were taken at eight to ten places, using two standard lenses. Standard lens II: Petzval type, f/2, f=50mm, infinite conjugate angular field up to 5°, λ=546nm Standard lens III : Gauss type, f/2.8, f=50mm, infinite conjugate angular field up to ±25°,λ=546nm As a measure for international comparison, SIRA Institute and JOERA exchanged their standard lens and performed measurements. The results of MTF measurements showed good coincide on the axis, but the spread of max. ±0.15 off the axis. We have examined the cause of this error. The measurement using monochromatic light except e-line and white light does not show good coincide. Then this year we intend to investigate this subject in both calculation and measurement.

収録刊行物

詳細情報 詳細情報について

  • CRID
    1874242817505986560
  • DOI
    10.1117/12.955280
  • ISSN
    0277786X
  • データソース種別
    • OpenAIRE

問題の指摘

ページトップへ