Fast Reactor Core Seismic Analysis for Verification of Assessment Model of Control Rod

<jats:p>The control rod guide tube self-stands on the core support plate. The control rod is inserted in the control rod guide tube, and the control rod hangs from the upper structure of the reactor. At scrum in case of an earthquake, the control rod is detached and it sits on the seating structure in the control rod guide tube (Fig.1). In a vertical earthquake, the control rod guide tube is raised from the core support plate, and the control rod is also raised from the control rod guide tube. Therefore, drawing out may arise. During the earthquake after scrum, the rising behavior is different from the other core elements because the control rod and the control rod guide tube rise interfering each other.</jats:p> <jats:p>The control rod guide tube is raised more easily than the fuel assembly by the vertical differential pressure of the core during operation, because the control rod guide tube is lighter than the fuel assembly. Therefore, it is necessary to restrain the rising of the control rod guide tube. The sleeve dashpot structure, in which a sleeve is attached on the upper surface of the receptacle tube, is employed. Moreover, the control rod guide tube is equipped with the control rod dashpot in order to restrain the rising displacement of the control rod.</jats:p> <jats:p>This paper summarizes the analysis method of the rising behavior of the single control rod guide tube and the rising behavior of the control rod and the control guide tube after the control rod is inserted.</jats:p>