ナノスケール機械加工と化学エッチングを併用した3次元極微細構造形成 : 第3報,エッチング加速作用のFIB照射条件依存性と3次元微細構造形成への応用(機械要素,潤滑,工作,生産管理など)
書誌事項
- タイトル別名
-
- ナノスケール キカイ カコウ ト カガク エッチング オ ヘイヨウ シタ 3ジゲン ゴクビサイ コウゾウ ケイセイ エッチング カソク サヨウ ノ FIB ショウシャ ジョウケン イゾンセイ ト 3ジゲン ビサイ コウゾウ ケイセイ エ ノ オウヨウ
- 3D Micro-Fabrication using Combination Technique of Nano-scale Processing and Chemical Etching : 3rd Report, Dependence of Enhanced Etching Effect on FIB Processing Conditions and Application to 3D Micro-Fabrication
この論文をさがす
抄録
application/pdf
A simple process to fabricate 3 D microstructures on single crystal silicon is presented in this study. The area irradiated by focused ion beam(FIB) can be selectively etched in HF solution. Etching characteristics of irradiated area are studied. The etch rate of irradiated area increases with increasing dose over 3.4×10^5 C/cm^2. In addition, it can be also controlled by accelerate voltage. Subsequently, it is etched by KOH solution in order to evaluate the mechanism of this phenomenon. Dependence of surface roughness on dot pitch is evaluated. Finally, 3 D microstructures can be fabricated based on these results, which indicates a possibility of industrial application as a novel 3D micro-fabrication process.
Article
収録刊行物
-
- 日本機械学會論文集. C編 = Transactions of the Japan Society of Mechanical Engineers. C
-
日本機械学會論文集. C編 = Transactions of the Japan Society of Mechanical Engineers. C 71 (705), 1754-1759, 2005-05
社団法人日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1050564289054690688
-
- NII論文ID
- 110006264726
-
- NII書誌ID
- AN00187463
-
- ISSN
- 03875024
-
- HANDLE
- 10110/1405
-
- NDL書誌ID
- 7376670
-
- 本文言語コード
- ja
-
- 資料種別
- journal article
-
- データソース種別
-
- IRDB
- NDL
- CiNii Articles