Synthesis of high<i>J</i><sub>c</sub>MgB<sub>2</sub>bulks with high reproducibility by a modified powder-in-tube method
説明
Systematic research on the improvement in Jc of MgB2 bulks by the optimization of sintering conditions was performed by applying a highly reproducible fabrication method. Compared with conventional methods, the fabrication method in the present study (powder-in-closed-tube, PICT) has quite a simple procedure: packing powders into the stainless tubes, pressing and sintering. The major merit of the fabrication method is complete suppression of Mg evaporation by uniaxial pressing of both ends of the metal tubes. Furthermore, resulting samples have the tape shape which is regarded as the short conductor with mono-core. Therefore, their critical current properties can be evaluated by the transport method as well as magnetic measurements. The undoped MgB2 bulk synthesized with optimized sintering conditions, at 850 °C for 3 h, recorded a high Jc of 3.9 × 105 A cm−2 at 20 K under self-field.
収録刊行物
-
- Superconductor Science and Technology
-
Superconductor Science and Technology 17 (7), 921-925, 2004-05-26
IOP Publishing
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1363951794219651328
-
- NII論文ID
- 30017771869
-
- ISSN
- 13616668
- 09532048
- http://id.crossref.org/issn/09532048
-
- データソース種別
-
- Crossref
- CiNii Articles
- OpenAIRE