-
- CHEN Yi-Lang
- Department of Industrial Engineering and Management, Mingchi University of Technology
-
- LEE Yu-Chi
- Department of Industrial Engineering and Engineering Management, National Tsing Hua University
-
- HSU Tin-Chi
- Department of Industrial Engineering and Management, Mingchi University of Technology
この論文をさがす
抄録
This study recruited 30 young Taiwanese males to determine the horizontally maximum isometric pushing and pulling strengths under 16 exertion heights and four handle-foot horizontal distances. This study shows that isometric push and pull strengths as measured on a simulated frictional floor condition in Taiwanese hypermarkets were markedly lower than previous tests using high-traction flooring or anchoring participant’s feet. Pushing strengths were always higher than pulling in all 64 task combinations, whereas no significant differences were present at heights of 30–60 cm. When considering maximum push and pull force demands, the optimal heights for such activities would be 50–90 cm (approximately ranged from the knee to hip position). The push and pull strength profiles identified in this study must be used appropriately, considering the real task situations.<br>
収録刊行物
-
- Industrial health
-
Industrial health 49 (6), 696-702, 2011
独立行政法人 労働者健康安全機構 労働安全衛生総合研究所
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204281182720
-
- NII論文ID
- 130004483506
-
- NII書誌ID
- AA00672955
-
- ISSN
- 18808026
- 00198366
-
- NDL書誌ID
- 023336985
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可