書誌事項
- タイトル別名
-
- Relation between Powder Properties and Grindability in a Particulate Material
- リュウジョウ コタイ ザイリョウ ノ フンタイ ブッセイ ト フンサイセイ ノ カンケイ
この論文をさがす
抄録
Comminution is an important mechanical operation in the many industries that treat partiulate solid materials. The grindability or the grinding resistance (e.g. Work index, Hardgrove grindability index) of the solid material are useful for evaluating the energy efficiency of the grinding processes, the grinding circuits and the grinding machines. It is difficult to measure the grindability from the point of the view of the measuring processes, time or the cost of the testing machine. Measuring powder properties (ex. void fraction, angle of repose) is easy in comparison with determining or grinding resistance.<br>We investigated the relationship between powder property and grindability in a particulate solid aterial. The solid material used was mono-sized quartz particles which were classified by dry and wet creening. The powder properties measured were the void fractions of the particle bed, with and without tapping, and the angle of repose of the particles. The grindability was defined by the mass of ground products less than the feed size per unit of crushing energy. This was determined by the compressive crushing test of the particle bed. We were able to define the correlation between the powder properties tested and the grindability; that is, we found that it was possible to evaluate the grindability or the grinding resistance of a particulate material by measuring the powder properties.
収録刊行物
-
- 素材物性学雑誌
-
素材物性学雑誌 23 (1), 25-31, 2010
日本素材物性学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204343895168
-
- NII論文ID
- 110007595600
-
- NII書誌ID
- AN10140273
-
- ISSN
- 18846610
- 09199853
-
- NDL書誌ID
- 10753026
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可