Considerations of the small-crack growth law based on COD. (Low Cycle bending fatigue test of an annealed 0.45%C steel in SEM).
Bibliographic Information
- Other Title
-
- き裂開口変位に基づく微小き裂伝ぱ則の考察 SEM内におけるS45C焼なまし材の低サイクル曲げ疲労試験
- キレツ カイコウ ヘンイ ニ モトズク ビショウ キレツ デンパソク ノ コウ
Search this article
Description
Bending low cycle fatigue tests were carried out on the specimens with a blind hole of an annealed 0.45%C steel in SEM. COD was measured by SEM photographs. The small-crack growth law was discussed based on COD. The main results obtained are as follows : (1) When strain level is constant, the shapes of the rims of cracks are geometrically similar to each other and the crack opening ratio, U, is nearly constant. (2) When dl/dN in several specimens are equal, COD near the crack tip are also nearly equal. (3) The phenomena mentioned above support the small-crack growth law dl/dN∝l.
Journal
-
- TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
-
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A 55 (511), 430-434, 1989
The Japan Society of Mechanical Engineers
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390001204478034944
-
- NII Article ID
- 110002377721
-
- NII Book ID
- AN0018742X
-
- ISSN
- 18848338
- 03875008
-
- NDL BIB ID
- 3215092
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL Search
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed