書誌事項
- タイトル別名
-
- Pulse-driven Induction-type Electrostatic Film Actuator.
- パルス クドウ ユウドウ デンカケイ セイデン フィルム アクチュエータ
この論文をさがす
抄録
A thin electrostatic linear actuator using plastic films has been developed. The film actuator consists of two sheets, a stator embedded with three-phase striped electrodes and a slider coated with a slightly conductive material. First, voltages are applied on the stator electrodes to induce electric charges on the slider. Then, pulse voltages are applied to generate propulsive force and have the slider traverse on the stator. The stator sheet has been fabricated by forming 240 [μm] pitched copper lines on a polyimide film and covering them with a polyimide film. As the slider sheet, a 12 [μm] PET film coated with mixture of polyurethane and carbon particles has been used. Total thickness and mass are 120 [μm] and 0.35 [g], respectively. This actuator produced 0.16 [N] propulsive force and 1.6 [mW] output power at 800 [V] driving voltage. The film actuator is expected to be used in variety of applications such as display devices, thin material conveyers, or powerful artificial muscles.
収録刊行物
-
- 日本ロボット学会誌
-
日本ロボット学会誌 15 (3), 373-380, 1997
一般社団法人 日本ロボット学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204725332608
-
- NII論文ID
- 10007548386
-
- NII書誌ID
- AN00141189
-
- ISSN
- 18847145
- 02891824
- http://id.crossref.org/issn/02891824
-
- NDL書誌ID
- 4193936
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可