レーザ干渉計を応用した非接触微細形状測定装置

DOI Web Site 被引用文献1件

書誌事項

タイトル別名
  • Non-contact Measuring Instrument of Micro-shapes with Laser Interferometer
  • レーザ カンショウケイ オ オウヨウシタ ヒ セッショク ビサイ ケイジョウ

この論文をさがす

抄録

Non-contact measuring instrument with laser interferometer is described in this paper, which can measure the coordinates of micro-shapes on a machined surface. When laser beam in the instru- ment is focused by an objective lens of 40 × and N. A. 0.65, the measurable height of micro-shapes is less than 3. 5 μm as a main performance and the measurable inclination is less than ±5.2°. The linearity is kept between lateral (X-axis) and ver-tical (Z-axis) displacements. By using the instrument, the following shapes can be measured : cross section of roughness comparison specimen, microstep height on a silicon wafer and cross section of scratched grooves on aluminum. Their results are compared with the results measured by stylus instrument, interference microscope and scanning electron microscope. The measurement accuracy of the present instrument can be estimated better than ±5 nm in the scattered range of measured values.

収録刊行物

  • 精密機械

    精密機械 50 (10), 1617-1621, 1984

    公益社団法人 精密工学会

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ