LEDチップInGaN薄膜表面へのエキシマフェムト秒レーザ加工による微細凹凸構造の形成と光取出しの高効率化

書誌事項

タイトル別名
  • Study on Improving the Llight Extraction Efficiency from a LED Chip by Relief Structures on the Surface of the InGaN Thin Film Induced by Femto-Second Excimer Laser Ablation
  • LED チップ InGaN ハクマク ヒョウメン エ ノ エキシマフェムトビョウ レーザ カコウ ニ ヨル ビサイ オウトツ コウゾウ ノ ケイセイ ト ヒカリ トリダシ ノ コウコウリツカ

この論文をさがす

説明

The luminous efficiency of light-emitting diodes (LEDs) improves and approaches that of fluorescent lamps. However, a significant portion of the light generated in the InGaN luminous layer of the LED chip is lost by total internal reflection and thus cannot be used for lighting purposes. We have developed a method of improving the light extraction efficiency from LED chips by strongly reducing these losses. The sapphire substrate is lifted off from the LED chip and a relief structure is created on the surface of the InGaN layer by direct ablation using a femto-second excimer laser with a wavelength of 248 nm and a pulse duration of 500 fs. This laser enables precise sub-μm structuring of the semiconductor layer with minimum thermal damage. As a result, light from the luminous layer diffracts at the solid / air interface and is not reflected back inside the film. In this way, the light extraction efficiency could be improved by a factor of two. After covering the structured InGaN surface with a protective resin, the light extraction efficiency could further be improved by an additional factor of 1.65 resulting in a total enhancement of more than a factor of three.

収録刊行物

  • 精密工学会誌

    精密工学会誌 77 (4), 400-404, 2011

    公益社団法人 精密工学会

被引用文献 (2)*注記

もっと見る

参考文献 (6)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ