書誌事項
- タイトル別名
-
- Observation of Whole Cam Surface and Outer and Inner Surfaces of Cylinder Using a Wide-Field Laser Microscope
抄録
Rolling elements are widely used due to their low friction properties. However, it is not easy to observe whole cylindrical surfaces with an optical microscope because they are out of plane. In a previous study, we could observe whole cylindrical surfaces in a very short time with the wide-field laser microscope we developed. The confocal scanning laser microscope can produce clear, high-contrast images because the reflected laser light comes from only a laser-irradiated point and there are no stray lights from other points than the laser-irradiated point. However, inner surfaces of cylinders are more difficult to observe than the outer surfaces of cylinders. Cam surfaces are not perfectly cylindrical and are also difficult to observe. In this study we tried to acquire surface images of such inner surfaces and cam surfaces. The inner surface of cylinder and the cam surface could be observed with the aid of a 45-degree inclined mirror and two motor driven linear stages respectively
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 82 (11), 976-982, 2016
公益社団法人 精密工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001204829889152
-
- NII論文ID
- 130005277751
-
- ISSN
- 1882675X
- 09120289
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可