分塊圧延時のクロップロス予測モデルとその最小化問題への適用

DOI Web Site Web Site 被引用文献1件

書誌事項

タイトル別名
  • A Mathematical Model of Crop Loss and Its Applications to Minimizing Crop Loss in Slabbing and Blooming
  • ブンカイ アツエンジ ノ クロップ ロス ヨソク モデル ト ソノ サイショウ

この論文をさがす

抄録

To formulate an optimum condition for minimizing crop loss in slabbing and blooming, the crop calculation program has been constructed on the basis of the model tests for plasticine and hot steel. In slabbing, it is shown that the influence of each factor of ingot size, ingot end profile, and rolling schedule upon crop loss formation changes in different ways according to the choice of their combination by use of the crop calculation program. The optimum rolling condition also depends upon the production mix of slabs.<BR>The crop calculation program is applicable to minimize crop loss in blooming, as well. It is shown that most of crop loss is formed in the earlier stage of rolling schedule before the groove rolling pass, and that the influence of reduction at each pass on the change of crop loss decreases in proportion to the increase of pass number.

収録刊行物

  • 鉄と鋼

    鉄と鋼 67 (15), 2365-2374, 1981

    一般社団法人 日本鉄鋼協会

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ