セラミックフィルターの圧環強度

  • 伊藤 義康
    (株) 東芝電力・産業システム技術開発センター
  • 池田 誠
    (株) 東芝電力・産業システム技術開発センター
  • 須山 章子
    (株) 東芝電力・産業システム技術開発センター
  • 池田 功
    (株) 東芝横浜材料部品工場

書誌事項

タイトル別名
  • Ring Compression Strength of Ceramic Filters.
  • セラミックフィルター ノ アツカン キョウド

この論文をさがす

抄録

Stress concentration behavior of the O-ring and C-ring test specimens compressed by diametrically opposite external concentrated loads has been analyzed using a finite element method. The ring compression strength for three kinds of tubular ceramic filter was evaluated using the O-ring and C-ring test specimens. It was indicated in this experiments that the fracture strength of both internal and external surfaces of tubular ceramic filters could be evaluated using the O-ring and C-ring tests, respectively. The experimental results showed that the O-ring compression strength and rigidity of silicon carbide-based filters were longer than that of alumina filters, silica- and magnesia-based filters were longer than alumina- and silica-based filters. It was also confirmed that a large difference in fracture strength of the internal and external surfaces can be observed in the case of silicon carbide-based filters.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (11)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ