点検技術研さん用の鋼I桁に疲労き裂を導入する試み
書誌事項
- タイトル別名
-
- Introducing fatigue cracks to welded details of plate girder for training of inspectors
抄録
In order to use for training inspectors and improving inspection technique for fatigue cracks in steel girder bridge, fatigue cracks were introduced into an actual steel girder removed from site. A motor with eccentric mass and special jigs were used to apply loading to welded detail. Fourteen fatigue cracks were introduced various welded joints, such as upper end of vertical stiffeners, gussets welded to girder webs, ends of horizontal stiffeners, and end weld of gusset through web slit. By using copper wires of 0.04mm diameter, which helped us to stop fatigue tests when fatigue cracks initiated at designated sizes, cracks of various sizes were introduced. They can be used for training visual inspection and non-destructive tests to be used during periodic and special inspections of steel bridges.
収録刊行物
-
- 構造工学論文集 A
-
構造工学論文集 A 59A (0), 790-797, 2013
公益社団法人 土木学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205283109504
-
- NII論文ID
- 130005438825
-
- ISSN
- 1881820X
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可