Evaluation of SF₆ Reactive Ion Etching Performance with a Permanent Magnet Located behind the Substrate based on a Simple Design Concept

  • MOTOMURA Taisei
    Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Technology
  • TAKAHASHI Kazunori
    Department of Electrical Engineering, Tohoku University
  • KASASHIMA Yuji
    Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Technology
  • Kikunaga Kazuya
    Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Technology
  • UESUGI Fumihiko
    Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Technology
  • ANDO Akira
    Department of Electrical Engineering, Tohoku University

書誌事項

タイトル別名
  • Evaluation of SF<sub>6</sub> Reactive Ion Etching Performance with a Permanent Magnet Located behind the Substrate based on a Simple Design Concept

この論文をさがす

説明

  Reactive ion etching performance with a permanent magnet located behind the substrate was evaluated in a compact vacuum chamber configuration with 38 mm inner diameter. This study presents a simple design concept for a compact SF6 plasma reactor that has high-density plasmas radially compressed by a magnetic field. The magnetic field lines, which are created by a solenoid coil and permanent magnet, effectively transport ions to the substrate located downstream from the plasma source, and thereby reduce losses of plasma to the radial boundaries of the compact chamber. An etching rate of ∼6.0 μm/min was obtained with input RF power of 500 W, a pulsed plasma discharge with duty ratio of 10%, and chamber pressure of 0.2 Pa. The etching rate achieved in the present study was increased more than tenfold, in comparison with our previous study, performed under similar conditions but without a permanent magnet located behind the substrate.<br>

収録刊行物

参考文献 (20)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ