いす型せん断試験体による木材のせん断弾性係数の決定

書誌事項

タイトル別名
  • Determination of the Shear Modulus of Wood with Standard Shear Block Specimen
  • イスガタ センダン シケンタイ ニ ヨル モクザイ ノ センダン ダンセイ ケイスウ ノ ケッテイ

この論文をさがす

抄録

Shear moduli of wood were obtained with the shear block test, using the strain distribution measured with Digital Image Correlation (DIC). For comparison, the shear moduli were also measured by the torsion of rectangular bars, which afterward were processed to fabricate shear block specimens. A good agreement was found between the shear moduli obtained from the shear block and the torsion tests. The relation between the shear modulus and the nominal shear strength obtained from the shear block test showed good correlation (correlation coefficient of 0.59). Thus it is concluded that by applying the DIC the shear modulus can be determined from shear block test and the shear modulus can be used as an estimator of the nominal shear strength.

収録刊行物

  • 材料

    材料 57 (4), 317-321, 2008

    公益社団法人 日本材料学会

被引用文献 (3)*注記

もっと見る

参考文献 (2)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ