J111033 ナノ銅粉末を用いたナノインプリント樹脂型インサートMIMによるマイクロ構造体の製造法([J11103]マイクロナノ理工学:nmからmmまでの表面制御とその応用(3))

DOI Web Site

書誌事項

タイトル別名
  • J111033 Manufacturing Method of Micro-Structured Parts by Nanoimprint Plastic Mold Insert MIM using Nano-sized Copper Powder

説明

This study aims to develop the manufacturing method of micro-structured parts by the metal powder injection molding (MIM) inserted micro-sacrificial plastic molds which were prepared by nano-imprint lithography (NIL) technique. In this process named NIL/p-SPiMIM, the feedstock composed of nanoscale copper powder and polyacetal-based binder was adequately prepared and molded into polymethylmethacrylate films with fine line-scan structures, and it was sintered in a reductive gas atmosphere followed by solvent debinding of the films. The filling rate of feedstock into micro-channels and transcriptional property in sintered parts was evaluated by SEM observation. It can be concluded that the manufacturing method named NIL/R-SPiMIM proposed in this study has great potential to produce precisely 3 dimensional complex metallic parts with fine micro-structures.

収録刊行物

  • 年次大会

    年次大会 2011 (0), _J111033-1-_J111033-5, 2011

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ