OS0303 カーボンナノチューブ応用遠隔ひずみ計測去の検討(OS3-1 ひずみ,OS-3 非破壊評価と構造モニタリング1)

書誌事項

タイトル別名
  • OS0303 Remote Strain Measurement Using Carbon Nanotube

抄録

Carbon nanotube(CNT)-dispersed resin is expected to be a highly sensitive and remote strain sensor without interconnections. Application of microwave showed the possibility of the non-contact measurement of the change of electrical impedance of the resin under dynamic load by measuring the change of its reflectivity obtained from the surface of the resin. A theoretical method to estimate the change of the intensity of the microwave reflected from the resin was discussed based on the microwave theory. The change of the reflectance under tensile strain of 11% was calculated by the method using the measured change of the impedance of the resin under the frequency range between 1Hz and 10MHz. As a result, both real and imaginary parts of the impedance changed drastically with applied strain.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ