Radiation-Induced Graft Polymerization of Isoprene onto Polyhydroxybutyrate.

  • Jiang Tao
    Institute of Polymer Science & Engineering, Department of Chemical Engineering, Materials Research Center, Tsinghua University
  • Hu Ping
    Institute of Polymer Science & Engineering, Department of Chemical Engineering, Materials Research Center, Tsinghua University

この論文をさがす

抄録

To improve the tenacity of polyhydroxybutyrate (PHB), isoprene was grafted onto polyhydroxybutyrate by direct radiation. The optimal conditions were determined, at which the grafting process occurred and suitable grafting degree was obtained. The effect of different solvents, monomer concentration and radiation dose on the grafting degree was studied. Some investigations and characterization on the prepared copolymer were made and the possible graft reaction process was explored. Tensile test of the graft polymer was carried out. The results showed that superior tenacity was achieved. The toughening mechanisms of isoprene graft modifying PHB were examined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

収録刊行物

  • Polymer Journal

    Polymer Journal 33 (9), 647-653, 2001

    The Society of Polymer Science, Japan

参考文献 (17)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ