アルミニウム切削面における残留応力分布と切削条件について

DOI Web Site

書誌事項

タイトル別名
  • Cutting conditions and residual stress distribution in orthogonal cut surface of aluminum
  • アルミニウム セッサクメン ニ オケル ザンリュウ オウリョク ブンプ ト セ

この論文をさがす

抄録

Orthogonal cutting tests of aluminum plates were carried out in such manners as repeated dry cutting, wet cutting, repeated wet cutting and combinations of them under different depths of cut, cutting speeds and rake angles to minimumize the residual stress. In the repeated cutting, the distribution of residual stress in the finally cut surface is considerably influenced by such a cutting condition that leads to high cutting resistance. Both wet and dry cutting result in the same patterns of stress distribution. A combination of dry rough cutting and wet finishing under the adequate cutting conditions ensures the cut surface free from residual stress.

収録刊行物

  • 軽金属

    軽金属 31 (8), 545-552, 1981

    一般社団法人 軽金属学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ