二次地金を用いたADC6,ADC12,AC2A合金発泡アルミニウムの製造

書誌事項

タイトル別名
  • Manufacture of Foamed Aluminum Using Recycled ADC6, ADC12, AC2A Ingots
  • ニジ ジガネ オ モチイタ ADC6 ADC12 AC2A ゴウキン ハッポウ

この論文をさがす

抄録

  The foamability of recycled alloys such as ADC6 (Al-0.27Si-3.11Mg), AC2A (Al-5.51Si-3.94Cu) and ADC12 (Al-11.2Si-1.8Cu) were investigated by a gas foaming process. The high Mg-content alloy (ADC6) took a considerably short time for viscosity to rise due to accelerated oxdiation of the melt. In addition, the AC2A alloy with a larger mushy zone (i. e. , larger liquidus-solidus difference) required a long time to promote the growth of the foam in the liquid-solid region. The high Fe-content alloy such as ADC12 alloy, easily forms solidification cracks due to the formation of Al-Fe-Si intermetallic compound. This problem was solved by controlling the solidification rate of the foaming process.

収録刊行物

  • 鋳造工学

    鋳造工学 68 (7), 567-571, 1996

    公益社団法人 日本鋳造工学会

参考文献 (7)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ