石こう鋳型と紙積層造形模型を用いた消失模型鋳造法における鋳物の寸法変化

書誌事項

タイトル別名
  • Dimensional Changes of Casting by Lost Foam Casting Process Using Plaster Mold and Sheet Lamination Model
  • セッコウ イガタ ト カミ セキソウ ゾウケイ モケイ オ モチイタ ショウシツ モケイ チュウゾウホウ ニ オケル イモノ ノ スンポウ ヘンカ

この論文をさがす

抄録

  The lost foam casting process was investigated experimentally using a sheet lamination model. The change in the mass with time of the sheet lamination model in a crucible heated in an electric furnace was measured. The temperature at which the sheet lamination model disappeared was obtained. The sheet lamination model was then placed in a plaster mold, heated, and made to disappear. Aluminum alloy was poured into this plaster mold, and dimensional changes in the casting from the sheet lamination model were measured. It was found that dimensional changes of the sheet fiber direction are not significant, but that of the laminating direction are large. This dimensional changes decreased when a sheet lamination model coated with cyanoacrylate adhesive was used.

収録刊行物

  • 鋳造工学

    鋳造工学 75 (12), 829-834, 2003

    公益社団法人 日本鋳造工学会

参考文献 (13)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ