ブチルゴムと金属の接着

DOI Web Site

書誌事項

タイトル別名
  • ADHFSION BETWEEN BUTYL-RUBBER AND METAL
  • ブチルゴム ト キンゾク ノ セッチャク
  • PART I. ADHESION BETWEEN SYNTHETIC RUBBER AND METAL

この論文をさがす

抄録

The strength of adhesion between iron metal and some synthetic rubbers (NBR, CR, SBR and IIR) was measured with using chlorinated rubber as the adhesive reagent and was found to be weaker in the order of NBR, CR, SBR and IIR.<br>In the case of NBR and CR, the strength of adhesion (vulcanization temperature: 150°C, vulcanization time: 60min.) was so strong that the rupture occurred in the region of synthetic rubber.<br>In the case of IIR, the adhesive power was very weak.<br>This was made a remarkable improvement by using halogenated butyl rubbers as the intermediate layer between IIR and adhesive reagent.

収録刊行物

  • 日本ゴム協会誌

    日本ゴム協会誌 37 (6), 409-412, 1964

    一般社団法人 日本ゴム協会

詳細情報 詳細情報について

問題の指摘

ページトップへ