書誌事項
- タイトル別名
-
- Effects of coolant on turning process of Titanium alloy
抄録
<p>Titanium alloys are high mechanical properties. Titanium alloys are applied to the fields of aviation, medial, automobile, and construction, in which products are made of processed metals. However, Titanium is inferior in low thermal conductivity, causing a charge of heat when it is being cut. That is why tools wear more quickly than other alloys do. For this reason, I focused on cutting fluid so as to solve this problem. If I can make cutting fluid capable of absorbing heat more effectively, the problem might be solved. Therefore, in this study, I am going to examine the effects of coolant on the turning process of Titanium alloy. A new cutting fluid was prepared by replacing the water used as the dilution water with the reforming water with small surface tension. The particle diameter of the oil agent was measured to ascertain what kind of liquid it was. Then, the liquid was actually used for cutting. We confirmed whether various effects of new cutting fluid are available.</p>
収録刊行物
-
- 日本機械学会関東支部総会講演会講演論文集
-
日本機械学会関東支部総会講演会講演論文集 2019.25 (0), 18D12-, 2019
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001277353454208
-
- NII論文ID
- 130007712576
-
- ISSN
- 24242691
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可